ST B-CAMS-IMX-MB1854

Overview

The B-CAMS-IMX camera module provides a compelling hardware set to handle multiple computer vision scenarios and use cases. It features a high-resolution 5‑Mpx RGB CMOS image sensor, an inertial motion unit, and a Time‑of‑Flight sensor. It can be used with any STM32 boards featuring a MIPI CSI-2® interface with a 22‑pin FFC connector to enable full-featured computer vision on STM32 microcontrollers and microprocessors easily.

B-CAMS-IMX-MB1854

B-CAMS-IMX MB1854 Image (Credit: STMicroelectronics.)

Requirements

The camera module bundle is compatible with all STM32 Discovery kits and Evaluation boards featuring a 22 pins FFC connector, such as the STM32N6570_DK Discovery kit.

Usage

The shield can be used in any application by setting SHIELD to st_b_cams_imx_mb1854 for boards with the necessary device tree node labels.

Set --shield "st_b_cams_imx_mb1854" when you invoke west build. For example:

# From the root of the zephyr repository
west build -b stm32n6570_dk --shield st_b_cams_imx_mb1854 samples/drivers/video/capture

References