IPC service: Multi-endpoint
This application demonstrates how to use IPC Service with multiple endpoints.
By default, it uses the icmsg_me backend.
You can also configure it to use the icbmsg backend.
Building the application for nrf5340dk/nrf5340/cpuapp
# From the root of the zephyr repository
west build -b nrf5340dk/nrf5340/cpuapp samples/subsys/ipc/ipc_service/multi_endpoint
west debug
Open a serial terminal (for example Minicom or PuTTY) and connect the board with the following settings:
Speed: 115200
Data: 8 bits
Parity: None
Stop bits: 1
After resetting the board, the following message will appear on the corresponding serial port:
*** Booting Zephyr OS build v3.4.0-rc1-108-gccfbac8b0721 ***
IPC-service HOST [INST 0 - ENDP A] demo started
IPC-service HOST [INST 0 - ENDP B] demo started
IPC-service HOST [INST 1] demo started
HOST [0A]: 1
HOST [0A]: 3
HOST [0B]: 1
HOST [1]: 1
...
HOST [0A]: 99
IPC-service HOST [INST 0 - ENDP A] demo ended.
HOST [0B]: 99
IPC-service HOST [INST 0 - ENDP B] demo ended.
HOST [1]: 99
IPC-service HOST [INST 1] demo ended.
*** Booting Zephyr OS build v3.4.0-rc1-108-gccfbac8b0721 ***
IPC-service REMOTE [INST 0 - ENDP A] demo started
IPC-service REMOTE [INST 0 - ENDP B] demo started
IPC-service REMOTE [INST 1] demo started
REMOTE [0A]: 0
REMOTE [0A]: 2
...
REMOTE [0A]: 98
IPC-service REMOTE [INST 0 - ENDP A] demo ended.
REMOTE [0B]: 98
IPC-service REMOTE [INST 0 - ENDP B] demo ended.
REMOTE [1]: 98
IPC-service REMOTE [INST 1] demo ended.
Changing the backend
To change the backend to icbmsg, switch the devicetree
overlay files as follows:
west build -b nrf5340dk/nrf5340/cpuapp --sysbuild -- \
-DDTC_OVERLAY_FILE=boards/nrf5340dk_nrf5340_cpuapp_icbmsg.overlay \
-Dremote_DTC_OVERLAY_FILE=boards/nrf5340dk_nrf5340_cpunet_icbmsg.overlay