zperf: Network Traffic Generator

Description

The zperf sample demonstrates the zperf shell utility, which allows to evaluate network bandwidth.

Features

Compatible with iPerf_2.0.5. Note that in newer iPerf versions, an error message like this is printed and the server reported statistics are missing.

LAST PACKET NOT RECEIVED!!!

Client or server mode allowed without need to modify the source code.

Supported Boards

zperf is board-agnostic. However, to run the zperf sample application, the target platform must provide a network interface supported by Zephyr.

This sample application has been tested on the following platforms:

Freedom Board (FRDM K64F)
QEMU x86
Arm FVP BaseR AEMv8-R
ARM BASE RevC AEMv8A Fixed Virtual Platforms

For best performance, the sample configures a lot of network packets and buffers. Because of this, the sample’s RAM requirements are quite large. In case the sample does not fit into target platform RAM, reduce the following configs:

CONFIG_NET_PKT_RX_COUNT=40
CONFIG_NET_PKT_TX_COUNT=40
CONFIG_NET_BUF_RX_COUNT=160
CONFIG_NET_BUF_TX_COUNT=160

Requirements

iPerf 2.0.5 installed on the host machine
Supported board

Depending on the network technology chosen, extra steps may be required to setup the network environment.

Usage

See zperf library documentation for more information about the library usage.