MAX17048 Li-Ion battery fuel gauge

Browse source code on GitHub

Overview

This sample shows how to use the Zephyr Fuel Gauge API driver for the MAX17048 fuel gauge.

The sample periodically reads battery percentage and power status

Building and Running

The sample can be configured to support MAX17048 fuel gauge connected via either I2C. It only needs an I2C pin configuration

Features

By using this fuel gauge you can get the following information:

  • Battery charge status as percentage

  • Total time until battery is fully charged or discharged

  • Battery voltage

  • Charging state: if charging or discharging

Notes

The charging state and the time to full/empty are estimated and based on the last consumption average. That means that if you plug/unplug a charger it will take some time until it is actually detected by the chip. Don’t try to plug/unplug to see in real time the charging status change because it will not work. If you really need to know exactly the moment when the battery is being charged you will need other method.

Sample output

` *** Booting Zephyr OS build 16043f62a40a *** Found device "max17048@36", getting fuel gauge data Time to empty 1911 Time to full 0 Charge 72% Voltage 3968 Time to empty 1911 Time to full 0 Charge 72% Voltage 3968 `