LP5562 RGB LED
Overview
This sample controls 4 LEDs connected to a TI LP5562 driver, using the following pattern:
turn on LEDs to be red
turn on LEDs to be green
turn on LEDs to be blue
turn on LEDs to be white
turn on LEDs to be yellow
turn on LEDs to be purple
turn on LEDs to be cyan
turn on LEDs to be orange
turn off LEDs
blink the LEDs in white
turn off LEDs
blink the LEDs in purple
turn off LEDs
Refer to the LP5562 Manual for the RGB LED connections and color channel mappings used by this sample.
Building and Running
Build the application for the nRF52840 DK board, and connect a LP5562 LED driver on the bus I2C0 at the address 0x30.
west build -b nrf52840dk/nrf52840 samples/drivers/led/lp5562
For flashing the application, refer to the Flashing section of the nRF52840 DK board documentation.