Bluetooth Low Energy Power Management on STM32WB
Overview
A simple application demonstrating the BLE operations (advertising) with
Zephyr power management enabled (CONFIG_PM).
After startup, a first 2 seconds beacon is performed, 1 second break and beacon is started again. BLE link is then disabled and started up again after 2 seconds, then same beacon sequence happens.
Finally, platform shutdown is triggered. It can be restarted by pressing the board reset button.
Using a power measurement tool, user can observe the platform reaching STOP2 mode before beacon is started and between advertising peaks besides as SHUTDOWN mode when requested.
Requirements
For now, only compatible with nucleo_wb55rg.