AutoPTS on Windows 10 with nRF52 board

This tutorial shows how to setup AutoPTS client and server to run both on Windows 10. We use WSL1 with Ubuntu only to build a Zephyr project to an elf file, because Zephyr SDK is not available on Windows yet. Tutorial covers only nrf52840dk.

Update Windows and drivers

Update Windows in:

Start -> Settings -> Update & Security -> Windows Update

Update drivers, following the instructions from your hardware vendor.

Install Python 3

Download and install Python 3. Setup was tested with versions >=3.8. Let the installer add the Python installation directory to the PATH and disable the path length limitation.

../../../_images/install_python1.png ../../../_images/install_python2.png

Install Git

Download and install Git. During installation enable option: Enable experimental support for pseudo consoles. We will use Git Bash as Windows terminal.

../../../_images/install_git.png

Install PTS 8

Install latest PTS from https://www.bluetooth.org. Remember to install drivers from installation directory “C:/Program Files (x86)/Bluetooth SIG/Bluetooth PTS/PTS Driver/win64/CSRBlueCoreUSB.inf”

../../../_images/install_pts_drivers.png

Note

Starting with PTS 8.0.1 the Bluetooth Protocol Viewer is no longer included. So to capture Bluetooth events, you have to download it separately.

Setup Zephyr project for Windows

Perform Windows setup from Getting Started Guide.

Install nrftools

On Windows download latest nrftools (version >= 10.12.1) from site https://www.nordicsemi.com/Software-and-tools/Development-Tools/nRF-Command-Line-Tools/Download and run default install.

../../../_images/download_nrftools_windows.png

Connect devices

../../../_images/devices_1.png ../../../_images/devices_2.png

Flash board

In Device Manager find COM port of your nrf board. In my case it is COM3.

../../../_images/device_manager.png

In Git Bash, go to zephyrproject

cd ~/zephyrproject

Build the auto-pts tester app

west build -p auto -b nrf52840dk/nrf52840 zephyr/tests/bluetooth/tester/

You can display flashing options with:

west flash --help

and flash board with built earlier elf file:

west flash --skip-rebuild --board-dir /dev/ttyS2 --elf-file ~/zephyrproject/build/zephyr/zephyr.elf

Note that west does not accept COMs, so use /dev/ttyS2 as the COM3 equivalent, /dev/ttyS2 as the COM3 equivalent, etc.(/dev/ttyS + decremented COM number).

Setup auto-pts project

In Git Bash, clone project repo:

git clone https://github.com/auto-pts/auto-pts.git

Go into the project folder:

cd auto-pts

Install required python modules:

pip3 install --user wheel
pip3 install --user -r autoptsserver_requirements.txt
pip3 install --user -r autoptsclient_requirements.txt

Install socat.exe

Download and extract socat.exe from https://sourceforge.net/projects/unix-utils/files/socat/1.7.3.2/ into folder ~/socat-1.7.3.2-1-x86_64/.

../../../_images/download_socat.png

Add path to directory of socat.exe to PATH:

../../../_images/add_socat_to_path.png

Running AutoPTS

Server and client by default will run on localhost address. Run server:

python ./autoptsserver.py -S 65000
../../../_images/autoptsserver_run.png

Note

If the error “ImportError: No module named pywintypes” appeared after the fresh setup, uninstall and install the pywin32 module:

pip install --upgrade --force-reinstall pywin32

Run client:

python ./autoptsclient-zephyr.py zephyr-master ~/zephyrproject/build/zephyr/zephyr.elf -t COM3 -b nrf52 -S 65000 -C 65001
../../../_images/autoptsclient_run.png

At the first run, when Windows asks, enable connection through firewall:

../../../_images/allow_firewall.png

Troubleshooting

  • “When running actual hardware test mode, I have only BTP TIMEOUTs.”

This is a problem with connection between auto-pts client and board. There are many possible causes. Try:

  • Clean your auto-pts and zephyr repos with

Warning

This command will force the irreversible removal of all uncommitted files in the repo.

git clean -fdx

then build and flash tester elf again.

  • If you have set up Windows on virtual machine, check if guest extensions are installed properly or change USB compatibility mode in VM settings to USB 2.0.

  • Check, if firewall in not blocking python.exe or socat.exe.

  • Check if board sends ready event after restart (hex 00 00 80 ff 00 00). Open serial connection to board with e.g. PuTTy with proper COM and baud rate. After board reset you should see some strings in console.

  • Check if socat.exe creates tunnel to board. Run in console

socat.exe -x -v tcp-listen:65123 /dev/ttyS2,raw,b115200

where /dev/ttyS2 is the COM3 equivalent. Open PuTTY, set connection type to Raw, IP to 127.0.0.1, port to 65123. After board reset you should see some strings in console.