Twinkie V2
Overview
Google Twinkie V2 is a reference board for the google power delivery analyzer (PDA) Twinkie V2.
Hardware
STM32G0B1REI6
Supported Features
The following features are supported:
Interface |
Controller |
Driver/Component |
|---|---|---|
PINMUX |
on-chip |
pinmux |
GPIO |
on-chip |
gpio |
CLOCK |
on-chip |
reset and clock control |
FLASH |
on-chip |
flash memory |
The default configuration can be found in the defconfig file: boards/google/twinkie_v2/google_twinkie_v2_defconfig
Pin Mapping
Default Zephyr Peripheral Mapping:
CC1_BUF : PA1
CC2_BUF : PA3
VBUS_READ_BUF : PB11
CSA_VBUS : PC4
CSA_CC2 : PC5
Programming and Debugging
Build application as usual for the google_twinkie_v2 board, and flash
using dfu-util or J-Link.
Debugging
Use SWD with a J-Link or ST-Link.