usb_device.h File Reference

USB device core layer APIs and structures. More...

#include <zephyr/drivers/usb/usb_dc.h>
#include <zephyr/usb/usb_ch9.h>
#include <zephyr/logging/log.h>
#include <zephyr/sys/iterable_sections.h>

Go to the source code of this file.

Data Structures
struct	usb_ep_cfg_data
	USB Endpoint Configuration. More...
struct	usb_interface_cfg_data
	USB Interface Configuration. More...
struct	usb_cfg_data
	USB device configuration. More...

Macros
#define	USBD_DEVICE_DESCR_DEFINE(p)
#define	USBD_CLASS_DESCR_DEFINE(p, instance)
#define	USBD_MISC_DESCR_DEFINE(p)
#define	USBD_USER_DESCR_DEFINE(p)
#define	USBD_STRING_DESCR_DEFINE(p)
#define	USBD_STRING_DESCR_USER_DEFINE(p)
#define	USBD_TERM_DESCR_DEFINE(p)
#define	USBD_DEFINE_CFG_DATA(name)
#define	USBD_CFG_DATA_DEFINE(p, name)
#define	USB_MAX_CTRL_MPS   64
	maximum packet size (MPS) for EP 0
#define	USB_MAX_FS_BULK_MPS   64
	full speed MPS for bulk EP
#define	USB_MAX_FS_INT_MPS   64
	full speed MPS for interrupt EP
#define	USB_MAX_FS_ISO_MPS   1023
	full speed MPS for isochronous EP
#define	USB_TRANS_READ   BIT(0) /** Read transfer flag */
#define	USB_TRANS_WRITE   BIT(1) /** Write transfer flag */
#define	USB_TRANS_NO_ZLP   BIT(2) /** No zero-length packet flag */
#define	USB_DEVICE_BOS_DESC_DEFINE_CAP    static __in_section(usb, bos_desc_area, 1) __aligned(1) __used
	Helper macro to place the BOS compatibility descriptor in the right memory section.

Typedefs
typedef void(*	usb_ep_callback) (uint8_t ep, enum usb_dc_ep_cb_status_code cb_status)
	Callback function signature for the USB Endpoint status.
typedef int(*	usb_request_handler) (struct usb_setup_packet *setup, int32_t *transfer_len, uint8_t **payload_data)
	Callback function signature for class specific requests.
typedef void(*	usb_interface_config) (struct usb_desc_header *head, uint8_t bInterfaceNumber)
	Function for interface runtime configuration.
typedef void(*	usb_transfer_callback) (uint8_t ep, int tsize, void *priv)
	Callback function signature for transfer completion.

Functions
int	usb_set_config (const uint8_t *usb_descriptor)
	Configure USB controller.
int	usb_deconfig (void)
	Deconfigure USB controller.
int	usb_enable (usb_dc_status_callback status_cb)
	Enable the USB subsystem and associated hardware.
int	usb_disable (void)
	Disable the USB device.
int	usb_write (uint8_t ep, const uint8_t *data, uint32_t data_len, uint32_t *bytes_ret)
	Write data to the specified endpoint.
int	usb_read (uint8_t ep, uint8_t *data, uint32_t max_data_len, uint32_t *ret_bytes)
	Read data from the specified endpoint.
int	usb_ep_set_stall (uint8_t ep)
	Set STALL condition on the specified endpoint.
int	usb_ep_clear_stall (uint8_t ep)
	Clears STALL condition on the specified endpoint.
int	usb_ep_read_wait (uint8_t ep, uint8_t *data, uint32_t max_data_len, uint32_t *read_bytes)
	Read data from the specified endpoint.
int	usb_ep_read_continue (uint8_t ep)
	Continue reading data from the endpoint.
void	usb_transfer_ep_callback (uint8_t ep, enum usb_dc_ep_cb_status_code)
	Transfer management endpoint callback.
int	usb_transfer (uint8_t ep, uint8_t *data, size_t dlen, unsigned int flags, usb_transfer_callback cb, void *priv)
	Start a transfer.
int	usb_transfer_sync (uint8_t ep, uint8_t *data, size_t dlen, unsigned int flags)
	Start a transfer and block-wait for completion.
void	usb_cancel_transfer (uint8_t ep)
	Cancel any ongoing transfer on the specified endpoint.
void	usb_cancel_transfers (void)
	Cancel all ongoing transfers.
bool	usb_transfer_is_busy (uint8_t ep)
	Check that transfer is ongoing for the endpoint.
int	usb_wakeup_request (void)
	Start the USB remote wakeup procedure.
bool	usb_get_remote_wakeup_status (void)
	Get status of the USB remote wakeup feature.
void	usb_bos_register_cap (void *hdr)
	Register BOS capability descriptor.

Detailed Description

USB device core layer APIs and structures.

This file contains the USB device core layer APIs and structures.

Macro Definition Documentation

USB_MAX_CTRL_MPS

#define USB_MAX_CTRL_MPS   64

maximum packet size (MPS) for EP 0

USB_MAX_FS_BULK_MPS

#define USB_MAX_FS_BULK_MPS   64

full speed MPS for bulk EP

USB_MAX_FS_INT_MPS

#define USB_MAX_FS_INT_MPS   64

full speed MPS for interrupt EP

USB_MAX_FS_ISO_MPS

#define USB_MAX_FS_ISO_MPS   1023

full speed MPS for isochronous EP

USBD_CFG_DATA_DEFINE

#define USBD_CFG_DATA_DEFINE	(		p,
			name )

Value:

        __DEPRECATED_MACRO \
        static __in_section(_usb_cfg_data, static, p##_name) __used __aligned(4)

USBD_CLASS_DESCR_DEFINE

#define USBD_CLASS_DESCR_DEFINE	(		p,
			instance )

Value:

        static __in_section(usb, descriptor_##p.1, instance) __used __aligned(1)

USBD_DEFINE_CFG_DATA

#define USBD_DEFINE_CFG_DATA

(

name

)

Value:

        static STRUCT_SECTION_ITERABLE(usb_cfg_data, name)

USBD_DEVICE_DESCR_DEFINE

#define USBD_DEVICE_DESCR_DEFINE

(

p

)

Value:

        static __in_section(usb, descriptor_##p, 0) __used __aligned(1)

USBD_MISC_DESCR_DEFINE

#define USBD_MISC_DESCR_DEFINE

(

p

)

Value:

        static __in_section(usb, descriptor_##p, 2) __used __aligned(1)

USBD_STRING_DESCR_DEFINE

#define USBD_STRING_DESCR_DEFINE

(

p

)

Value:

        static __in_section(usb, descriptor_##p, 4) __used __aligned(1)

USBD_STRING_DESCR_USER_DEFINE

#define USBD_STRING_DESCR_USER_DEFINE

(

p

)

Value:

        static __in_section(usb, descriptor_##p, 5) __used __aligned(1)

USBD_TERM_DESCR_DEFINE

#define USBD_TERM_DESCR_DEFINE

(

p

)

Value:

        static __in_section(usb, descriptor_##p, 6) __used __aligned(1)

USBD_USER_DESCR_DEFINE

#define USBD_USER_DESCR_DEFINE

(

p

)

Value:

        static __in_section(usb, descriptor_##p, 3) __used __aligned(1)