ft8xx_reference_api.h File Reference

FT8XX reference API. More...

#include <stdint.h>
#include <zephyr/drivers/misc/ft8xx/ft8xx_copro.h>
#include <zephyr/drivers/misc/ft8xx/ft8xx_common.h>
#include <zephyr/drivers/misc/ft8xx/ft8xx_dl.h>
#include <zephyr/drivers/misc/ft8xx/ft8xx_memory.h>

Go to the source code of this file.

Macros
#define	OPT_3D   FT8XX_OPT_3D
	Co-processor widget is drawn in 3D effect.
#define	OPT_RGB565   FT8XX_OPT_RGB565
	Co-processor option to decode the JPEG image to RGB565 format.
#define	OPT_MONO   FT8XX_OPT_MONO
	Co-processor option to decode the JPEG image to L8 format, i.e., monochrome.
#define	OPT_NODL   FT8XX_OPT_NODL
	No display list commands generated for bitmap decoded from JPEG image.
#define	OPT_FLAT   FT8XX_OPT_FLAT
	Co-processor widget is drawn without 3D effect.
#define	OPT_SIGNED   FT8XX_OPT_SIGNED
	The number is treated as 32 bit signed integer.
#define	OPT_CENTERX   FT8XX_OPT_CENTERX
	Co-processor widget centers horizontally.
#define	OPT_CENTERY   FT8XX_OPT_CENTERY
	Co-processor widget centers vertically.
#define	OPT_CENTER   FT8XX_OPT_CENTER
	Co-processor widget centers horizontally and vertically.
#define	OPT_RIGHTX   FT8XX_OPT_RIGHTX
	The label on the Coprocessor widget is right justified.
#define	OPT_NOBACK   FT8XX_OPT_NOBACK
	Co-processor widget has no background drawn.
#define	OPT_NOTICKS   FT8XX_OPT_NOTICKS
	Co-processor clock widget is drawn without hour ticks.
#define	OPT_NOHM   FT8XX_OPT_NOHM
	Co-processor clock widget is drawn without hour and minutes hands, only seconds hand is drawn.
#define	OPT_NOPOINTER   FT8XX_OPT_NOPOINTER
	The Co-processor gauge has no pointer.
#define	OPT_NOSECS   FT8XX_OPT_NOSECS
	Co-processor clock widget is drawn without seconds hand.
#define	OPT_NOHANDS   FT8XX_OPT_NOHANDS
	Co-processor clock widget is drawn without hour, minutes and seconds hands.
#define	BITMAPS   FT8XX_BITMAPS
	Rectangular pixel arrays, in various color formats.
#define	POINTS   FT8XX_POINTS
	Anti-aliased points, point radius is 1-256 pixels.
#define	LINES   FT8XX_LINES
	Anti-aliased lines, with width from 0 to 4095 1/16th of pixel units.
#define	LINE_STRIP   FT8XX_LINE_STRIP
	Anti-aliased lines, connected head-to-tail.
#define	EDGE_STRIP_R   FT8XX_EDGE_STRIP_R
	Edge strips for right.
#define	EDGE_STRIP_L   FT8XX_EDGE_STRIP_L
	Edge strips for left.
#define	EDGE_STRIP_A   FT8XX_EDGE_STRIP_A
	Edge strips for above.
#define	EDGE_STRIP_B   FT8XX_EDGE_STRIP_B
	Edge strips for below.
#define	RECTS   FT8XX_RECTS
	Round-cornered rectangles, curvature of the corners can be adjusted using LINE_WIDTH.
#define	BEGIN(prim)
	Begin drawing a graphics primitive.
#define	CLEAR(c, s, t)
	Clear buffers to preset values.
#define	CLEAR_COLOR_RGB(red, green, blue)
	Specify clear values for red, green and blue channels.
#define	COLOR_RGB(red, green, blue)
	Set the current color red, green and blue.
#define	DISPLAY()
	End the display list.
#define	END()
	End drawing a graphics primitive.
#define	LINE_WIDTH(width)
	Specify the width of lines to be drawn with primitive LINES.
#define	TAG(s)
	Attach the tag value for the following graphics objects.
#define	VERTEX2F(x, y)
	Start the operation of graphics primitives at the specified coordinate.
#define	VERTEX2II(x, y, handle, cell)
	Start the operation of graphics primitive at the specified coordinates.

Enumerations
enum	ft8xx_memory_map_t { RAM_G = FT810_RAM_G , RAM_DL = FT810_RAM_DL , REG_ = FT810_REG_ , RAM_CMD = FT810_RAM_CMD }
	Main parts of FT810 memory map. More...
enum	ft8xx_register_address_t {   REG_TRIM = FT810_REG_TRIM , REG_ID = FT810_REG_ID , REG_FRAMES = FT810_REG_FRAMES , REG_CLOCK = FT810_REG_CLOCK ,   REG_FREQUENCY = FT810_REG_FREQUENCY , REG_RENDERMODE = FT810_REG_RENDERMODE , REG_SNAPY = FT810_REG_SNAPY , REG_SNAPSHOT = FT810_REG_SNAPSHOT ,   REG_CPURESET = FT810_REG_CPURESET , REG_TAP_CRC = FT810_REG_TAP_CRC , REG_TAP_MASK = FT810_REG_TAP_MASK , REG_HCYCLE = FT810_REG_HCYCLE ,   REG_HOFFSET = FT810_REG_HOFFSET , REG_HSIZE = FT810_REG_HSIZE , REG_HSYNC0 = FT810_REG_HSYNC0 , REG_HSYNC1 = FT810_REG_HSYNC1 ,   REG_VCYCLE = FT810_REG_VCYCLE , REG_VOFFSET = FT810_REG_VOFFSET , REG_VSIZE = FT810_REG_VSIZE , REG_VSYNC0 = FT810_REG_VSYNC0 ,   REG_VSYNC1 = FT810_REG_VSYNC1 , REG_DLSWAP = FT810_REG_DLSWAP , REG_ROTATE = FT810_REG_ROTATE , REG_OUTBITS = FT810_REG_OUTBITS ,   REG_DITHER = FT810_REG_DITHER , REG_SWIZZLE = FT810_REG_SWIZZLE , REG_CSPREAD = FT810_REG_CSPREAD , REG_PCLK_POL = FT810_REG_PCLK_POL ,   REG_PCLK = FT810_REG_PCLK , REG_TAG_X = FT810_REG_TAG_X , REG_TAG_Y = FT810_REG_TAG_Y , REG_TAG = FT810_REG_TAG ,   REG_VOL_PB = FT810_REG_VOL_PB , REG_VOL_SOUND = FT810_REG_VOL_SOUND , REG_SOUND = FT810_REG_SOUND , REG_PLAY = FT810_REG_PLAY ,   REG_GPIO_DIR = FT810_REG_GPIO_DIR , REG_GPIO = FT810_REG_GPIO , REG_GPIOX_DIR = FT810_REG_GPIOX_DIR , REG_GPIOX = FT810_REG_GPIOX ,   REG_INT_FLAGS = FT810_REG_INT_FLAGS , REG_INT_EN = FT810_REG_INT_EN , REG_INT_MASK = FT810_REG_INT_MASK , REG_PLAYBACK_START = FT810_REG_PLAYBACK_START ,   REG_PLAYBACK_LENGTH = FT810_REG_PLAYBACK_LENGTH , REG_PLAYBACK_READPTR = FT810_REG_PLAYBACK_READPTR , REG_PLAYBACK_FREQ = FT810_REG_PLAYBACK_FREQ , REG_PLAYBACK_FORMAT = FT810_REG_PLAYBACK_FORMAT ,   REG_PLAYBACK_LOOP = FT810_REG_PLAYBACK_LOOP , REG_PLAYBACK_PLAY = FT810_REG_PLAYBACK_PLAY , REG_PWM_HZ = FT810_REG_PWM_HZ , REG_PWM_DUTY = FT810_REG_PWM_DUTY ,   REG_CMD_READ = FT810_REG_CMD_READ , REG_CMD_WRITE = FT810_REG_CMD_WRITE , REG_CMD_DL = FT810_REG_CMD_DL , REG_TOUCH_MODE = FT810_REG_TOUCH_MODE ,   REG_TOUCH_ADC_MODE = FT810_REG_TOUCH_ADC_MODE , REG_TOUCH_CHARGE = FT810_REG_TOUCH_CHARGE , REG_TOUCH_SETTLE = FT810_REG_TOUCH_SETTLE , REG_TOUCH_OVERSAMPLE = FT810_REG_TOUCH_OVERSAMPLE ,   REG_TOUCH_RZTHRESH = FT810_REG_TOUCH_RZTHRESH , REG_TOUCH_RAW_XY = FT810_REG_TOUCH_RAW_XY , REG_TOUCH_RZ = FT810_REG_TOUCH_RZ , REG_TOUCH_SCREEN_XY = FT810_REG_TOUCH_SCREEN_XY ,   REG_TOUCH_TAG_XY = FT810_REG_TOUCH_TAG_XY , REG_TOUCH_TAG = FT810_REG_TOUCH_TAG , REG_TOUCH_TRANSFORM_A = FT810_REG_TOUCH_TRANSFORM_A , REG_TOUCH_TRANSFORM_B = FT810_REG_TOUCH_TRANSFORM_B ,   REG_TOUCH_TRANSFORM_C = FT810_REG_TOUCH_TRANSFORM_C , REG_TOUCH_TRANSFORM_D = FT810_REG_TOUCH_TRANSFORM_D , REG_TOUCH_TRANSFORM_E = FT810_REG_TOUCH_TRANSFORM_E , REG_TOUCH_TRANSFORM_F = FT810_REG_TOUCH_TRANSFORM_F ,   REG_TOUCH_CONFIG = FT810_REG_TOUCH_CONFIG , REG_SPI_WIDTH = FT810_REG_SPI_WIDTH , REG_TOUCH_DIRECT_XY = FT810_REG_TOUCH_DIRECT_XY , REG_TOUCH_DIRECT_Z1Z2 = FT810_REG_TOUCH_DIRECT_Z1Z2 ,   REG_CMDB_SPACE = FT810_REG_CMDB_SPACE , REG_CMDB_WRITE = FT810_REG_CMDB_WRITE , REG_TRACKER = FT810_REG_TRACKER , REG_TRACKER1 = FT810_REG_TRACKER1 ,   REG_TRACKER2 = FT810_REG_TRACKER2 , REG_TRACKER3 = FT810_REG_TRACKER3 , REG_TRACKER4 = FT810_REG_TRACKER4 , REG_MEDIAFIFO_READ = FT810_REG_MEDIAFIFO_READ ,   REG_MEDIAFIFO_WRITE = FT810_REG_MEDIAFIFO_WRITE }
	FT810 register addresses. More...

Functions
static void	wr8 (uint32_t address, uint8_t data)
	Write 1 byte (8 bits) to FT8xx memory.
static void	wr16 (uint32_t address, uint16_t data)
	Write 2 bytes (16 bits) to FT8xx memory.
static void	wr32 (uint32_t address, uint32_t data)
	Write 4 bytes (32 bits) to FT8xx memory.
static uint8_t	rd8 (uint32_t address)
	Read 1 byte (8 bits) from FT8xx memory.
static uint16_t	rd16 (uint32_t address)
	Read 2 bytes (16 bits) from FT8xx memory.
static uint32_t	rd32 (uint32_t address)
	Read 4 bytes (32 bits) from FT8xx memory.
static void	cmd (uint32_t command)
	Execute a display list command by co-processor engine.
static void	cmd_dlstart (void)
	Start a new display list.
static void	cmd_swap (void)
	Swap the current display list.
static void	cmd_text (int16_t x, int16_t y, int16_t font, uint16_t options, const char *s)
	Draw text.
static void	cmd_number (int16_t x, int16_t y, int16_t font, uint16_t options, int32_t n)
	Draw a decimal number.
static void	cmd_calibrate (uint32_t *result)
	Execute the touch screen calibration routine.

Detailed Description

FT8XX reference API.