adc_npcx_threshold.h File Reference

#include <zephyr/device.h>

Go to the source code of this file.

Data Structures
struct	adc_npcx_threshold_param

Enumerations
enum	adc_npcx_threshold_param_l_h { ADC_NPCX_THRESHOLD_PARAM_L_H_HIGHER , ADC_NPCX_THRESHOLD_PARAM_L_H_LOWER }
enum	adc_npcx_threshold_param_type {   ADC_NPCX_THRESHOLD_PARAM_CHNSEL , ADC_NPCX_THRESHOLD_PARAM_L_H , ADC_NPCX_THRESHOLD_PARAM_THVAL , ADC_NPCX_THRESHOLD_PARAM_WORK ,   ADC_NPCX_THRESHOLD_PARAM_MAX }

Functions
int	adc_npcx_threshold_mv_to_thrval (const struct device *dev, uint32_t val_mv, uint32_t *thrval)
	Convert input value in millivolts to corresponding threshold register value.
int	adc_npcx_threshold_ctrl_set_param (const struct device *dev, const uint8_t th_sel, const struct adc_npcx_threshold_param *param)
	Set ADC threshold parameter.
int	adc_npcx_threshold_ctrl_enable (const struct device *dev, uint8_t th_sel, const bool enable)
	Enables/Disables ADC threshold interruption.

Enumeration Type Documentation

adc_npcx_threshold_param_l_h

enum adc_npcx_threshold_param_l_h

Enumerator
ADC_NPCX_THRESHOLD_PARAM_L_H_HIGHER
ADC_NPCX_THRESHOLD_PARAM_L_H_LOWER

adc_npcx_threshold_param_type

enum adc_npcx_threshold_param_type

Enumerator
ADC_NPCX_THRESHOLD_PARAM_CHNSEL
ADC_NPCX_THRESHOLD_PARAM_L_H
ADC_NPCX_THRESHOLD_PARAM_THVAL
ADC_NPCX_THRESHOLD_PARAM_WORK
ADC_NPCX_THRESHOLD_PARAM_MAX

Function Documentation

adc_npcx_threshold_ctrl_enable()

int adc_npcx_threshold_ctrl_enable	(	const struct device *	dev,
		uint8_t	th_sel,
		const bool	enable )

Enables/Disables ADC threshold interruption.

Note

This function is available only if

CONFIG_ADC_CMP_NPCX 

is selected.

Parameters

dev	Pointer to the device structure for the driver instance.
th_sel	Threshold selected.
enable	Enable or disables threshold interruption.

Returns

0 on success, negative error code otherwise. all parameters must be configure prior enabling threshold interruption, otherwise error will be returned.

adc_npcx_threshold_ctrl_set_param()

int adc_npcx_threshold_ctrl_set_param	(	const struct device *	dev,
		const uint8_t	th_sel,
		const struct adc_npcx_threshold_param *	param )

Set ADC threshold parameter.

Note

This function is available only if

CONFIG_ADC_CMP_NPCX 

is selected.

Parameters

dev	Pointer to the device structure for the driver instance.
th_sel	Threshold selected.
param	Pointer of parameter structure. See struct adc_npcx_threshold_param for supported parameters.

Returns

0 on success, negative error code otherwise.

adc_npcx_threshold_mv_to_thrval()

int adc_npcx_threshold_mv_to_thrval	(	const struct device *	dev,
		uint32_t	val_mv,
		uint32_t *	thrval )

Convert input value in millivolts to corresponding threshold register value.

Note

This function is available only if

CONFIG_ADC_CMP_NPCX 

is selected.

Parameters

dev	Pointer to the device structure for the driver instance.
val_mv	Input value in millivolts to be converted.
thrval	Pointer of variable to hold the result of conversion.

Returns

0 on success, negative result if input cannot be converted due to overflow.