nordic,nrf7120-wifi
Description
Wi-Fi domain of nRF7120 Wi-Fi and Bluetooth combo SoC.
Properties
Properties not inherited from the base binding file.
Name |
Type |
Details |
|---|---|---|
|
|
Crystal oscillator (XO) frequency offset trim, applied by the Wi-Fi
firmware for frequency/temperature/voltage-dependent calibration.
This is a board-level value that depends on the crystal used.
The typical default is 0. Interpreted by the firmware as a signed
8-bit value.
Default value: |
|
|
Maximum transmit power allowed in 2.4GHz band for DSSS/CCK rates
Default value: |
|
|
Maximum transmit power allowed in 2.4GHz band for MCS0
Default value: |
|
|
Maximum transmit power allowed in 2.4GHz band for MCS7
Default value: |
|
|
Maximum transmit power allowed in 5GHz band MCS0 low sub-band
Default value: |
|
|
Maximum transmit power allowed in 5GHz band MCS7 low sub-band
Default value: |
|
|
Maximum transmit power allowed in 5GHz band MCS0 mid sub-band
Default value: |
|
|
Maximum transmit power allowed in 5GHz band MCS7 mid sub-band
Default value: |
|
|
Maximum transmit power allowed in 5GHz band MCS0 high sub-band
Default value: |
|
|
Maximum transmit power allowed in 5GHz band MCS7 high sub-band
Default value: |
|
|
Maximum transmit power allowed in 6GHz band1 for MCS0
Default value: |
|
|
Maximum transmit power allowed in 6GHz band1 for MCS7
Default value: |
|
|
Maximum transmit power allowed in 6GHz band2 for MCS0
Default value: |
|
|
Maximum transmit power allowed in 6GHz band2 for MCS7
Default value: |
|
|
Maximum transmit power allowed in 6GHz band3 for MCS0
Default value: |
|
|
Maximum transmit power allowed in 6GHz band3 for MCS7
Default value: |
|
|
Maximum transmit power allowed in 6GHz band4 for MCS0
Default value: |
|
|
Maximum transmit power allowed in 6GHz band4 for MCS7
Default value: |
|
|
Maximum transmit power allowed in 6GHz band5 for MCS0
Default value: |
|
|
Maximum transmit power allowed in 6GHz band5 for MCS7
Default value: |
|
|
Maximum transmit power allowed in 6GHz band6 for MCS0
Default value: |
|
|
Maximum transmit power allowed in 6GHz band6 for MCS7
Default value: |
|
|
Net antenna gain for the 2.4 GHz band, in dB, in steps of 1 dB.
Valid range is -8 to 7. This is the gain of the antenna less the loss
of the RF path to it, so a board whose path loses more than its antenna
gains states a negative value.
Default value: |
|
|
Net antenna gain for the 5 GHz band 1 (5150 MHz - 5350 MHz), in dB, in steps of 1 dB.
Valid range is -8 to 7. This is the gain of the antenna less the loss
of the RF path to it, so a board whose path loses more than its antenna
gains states a negative value.
Default value: |
|
|
Net antenna gain for the 5 GHz band 2 (5470 MHz - 5730 MHz), in dB, in steps of 1 dB.
Valid range is -8 to 7. This is the gain of the antenna less the loss
of the RF path to it, so a board whose path loses more than its antenna
gains states a negative value.
Default value: |
|
|
Net antenna gain for the 5 GHz band 3 (5730 MHz - 5895 MHz), in dB, in steps of 1 dB.
Valid range is -8 to 7. This is the gain of the antenna less the loss
of the RF path to it, so a board whose path loses more than its antenna
gains states a negative value.
Default value: |
|
|
Net antenna gain for the 6 GHz band 1 (5935 MHz - 6015 MHz), in dB, in steps of
1 dB. Valid range is -8 to 7. This is the gain of the antenna less the
loss of the RF path to it, so a board whose path loses more than its
antenna gains states a negative value.
Default value: |
|
|
Net antenna gain for the 6 GHz band 2 (6035 MHz - 6115 MHz), in dB, in steps of
1 dB. Valid range is -8 to 7. This is the gain of the antenna less the
loss of the RF path to it, so a board whose path loses more than its
antenna gains states a negative value.
Default value: |
|
|
Net antenna gain for the 6 GHz band 3 (6135 MHz - 6215 MHz), in dB, in steps of
1 dB. Valid range is -8 to 7. This is the gain of the antenna less the
loss of the RF path to it, so a board whose path loses more than its
antenna gains states a negative value.
Default value: |
|
|
Net antenna gain for the 6 GHz band 4 (6235 MHz - 6315 MHz), in dB, in steps of
1 dB. Valid range is -8 to 7. This is the gain of the antenna less the
loss of the RF path to it, so a board whose path loses more than its
antenna gains states a negative value.
Default value: |
|
|
Net antenna gain for the 6 GHz band 5 (6335 MHz - 6415 MHz), in dB, in steps of
1 dB. Valid range is -8 to 7. This is the gain of the antenna less the
loss of the RF path to it, so a board whose path loses more than its
antenna gains states a negative value.
Default value: |
|
|
Net antenna gain for the 6 GHz band 6 (6435 MHz - 6475 MHz), in dB, in steps of
1 dB. Valid range is -8 to 7. This is the gain of the antenna less the
loss of the RF path to it, so a board whose path loses more than its
antenna gains states a negative value.
Default value: |
|
|
Maximum transmit power allowed for DSSS/CCK rates at the lower
edge of the 2.4 GHz band (2412 MHz - 2484 MHz), in dBm, in steps of 1 dBm.
Valid range is 0 to 31, where the default of 31 places no restriction
beyond the band's transmit power ceiling.
Default value: |
|
|
Maximum transmit power allowed for HT/VHT rates at the lower
edge of the 2.4 GHz band (2412 MHz - 2484 MHz), in dBm, in steps of 1 dBm.
Valid range is 0 to 31, where the default of 31 places no restriction
beyond the band's transmit power ceiling.
Default value: |
|
|
Maximum transmit power allowed for HE rates at the lower
edge of the 2.4 GHz band (2412 MHz - 2484 MHz), in dBm, in steps of 1 dBm.
Valid range is 0 to 31, where the default of 31 places no restriction
beyond the band's transmit power ceiling.
Default value: |
|
|
Maximum transmit power allowed for DSSS/CCK rates at the upper
edge of the 2.4 GHz band (2412 MHz - 2484 MHz), in dBm, in steps of 1 dBm.
Valid range is 0 to 31, where the default of 31 places no restriction
beyond the band's transmit power ceiling.
Default value: |
|
|
Maximum transmit power allowed for HT/VHT rates at the upper
edge of the 2.4 GHz band (2412 MHz - 2484 MHz), in dBm, in steps of 1 dBm.
Valid range is 0 to 31, where the default of 31 places no restriction
beyond the band's transmit power ceiling.
Default value: |
|
|
Maximum transmit power allowed for HE rates at the upper
edge of the 2.4 GHz band (2412 MHz - 2484 MHz), in dBm, in steps of 1 dBm.
Valid range is 0 to 31, where the default of 31 places no restriction
beyond the band's transmit power ceiling.
Default value: |
|
|
Maximum transmit power allowed for HT/VHT rates at the lower
edge of the UNII-1 band (5160 MHz - 5240 MHz), in dBm, in steps of 1 dBm.
Valid range is 0 to 31, where the default of 31 places no restriction
beyond the band's transmit power ceiling.
Default value: |
|
|
Maximum transmit power allowed for HE rates at the lower
edge of the UNII-1 band (5160 MHz - 5240 MHz), in dBm, in steps of 1 dBm.
Valid range is 0 to 31, where the default of 31 places no restriction
beyond the band's transmit power ceiling.
Default value: |
|
|
Maximum transmit power allowed for HT/VHT rates at the upper
edge of the UNII-1 band (5160 MHz - 5240 MHz), in dBm, in steps of 1 dBm.
Valid range is 0 to 31, where the default of 31 places no restriction
beyond the band's transmit power ceiling.
Default value: |
|
|
Maximum transmit power allowed for HE rates at the upper
edge of the UNII-1 band (5160 MHz - 5240 MHz), in dBm, in steps of 1 dBm.
Valid range is 0 to 31, where the default of 31 places no restriction
beyond the band's transmit power ceiling.
Default value: |
|
|
Maximum transmit power allowed for HT/VHT rates at the lower
edge of the UNII-2A band (5260 MHz - 5340 MHz), in dBm, in steps of 1 dBm.
Valid range is 0 to 31, where the default of 31 places no restriction
beyond the band's transmit power ceiling.
Default value: |
|
|
Maximum transmit power allowed for HE rates at the lower
edge of the UNII-2A band (5260 MHz - 5340 MHz), in dBm, in steps of 1 dBm.
Valid range is 0 to 31, where the default of 31 places no restriction
beyond the band's transmit power ceiling.
Default value: |
|
|
Maximum transmit power allowed for HT/VHT rates at the upper
edge of the UNII-2A band (5260 MHz - 5340 MHz), in dBm, in steps of 1 dBm.
Valid range is 0 to 31, where the default of 31 places no restriction
beyond the band's transmit power ceiling.
Default value: |
|
|
Maximum transmit power allowed for HE rates at the upper
edge of the UNII-2A band (5260 MHz - 5340 MHz), in dBm, in steps of 1 dBm.
Valid range is 0 to 31, where the default of 31 places no restriction
beyond the band's transmit power ceiling.
Default value: |
|
|
Maximum transmit power allowed for HT/VHT rates at the lower
edge of the UNII-2C band (5480 MHz - 5720 MHz), in dBm, in steps of 1 dBm.
Valid range is 0 to 31, where the default of 31 places no restriction
beyond the band's transmit power ceiling.
Default value: |
|
|
Maximum transmit power allowed for HE rates at the lower
edge of the UNII-2C band (5480 MHz - 5720 MHz), in dBm, in steps of 1 dBm.
Valid range is 0 to 31, where the default of 31 places no restriction
beyond the band's transmit power ceiling.
Default value: |
|
|
Maximum transmit power allowed for HT/VHT rates at the upper
edge of the UNII-2C band (5480 MHz - 5720 MHz), in dBm, in steps of 1 dBm.
Valid range is 0 to 31, where the default of 31 places no restriction
beyond the band's transmit power ceiling.
Default value: |
|
|
Maximum transmit power allowed for HE rates at the upper
edge of the UNII-2C band (5480 MHz - 5720 MHz), in dBm, in steps of 1 dBm.
Valid range is 0 to 31, where the default of 31 places no restriction
beyond the band's transmit power ceiling.
Default value: |
|
|
Maximum transmit power allowed for HT/VHT rates at the lower
edge of the UNII-3 band (5745 MHz - 5825 MHz), in dBm, in steps of 1 dBm.
Valid range is 0 to 31, where the default of 31 places no restriction
beyond the band's transmit power ceiling.
Default value: |
|
|
Maximum transmit power allowed for HE rates at the lower
edge of the UNII-3 band (5745 MHz - 5825 MHz), in dBm, in steps of 1 dBm.
Valid range is 0 to 31, where the default of 31 places no restriction
beyond the band's transmit power ceiling.
Default value: |
|
|
Maximum transmit power allowed for HT/VHT rates at the upper
edge of the UNII-3 band (5745 MHz - 5825 MHz), in dBm, in steps of 1 dBm.
Valid range is 0 to 31, where the default of 31 places no restriction
beyond the band's transmit power ceiling.
Default value: |
|
|
Maximum transmit power allowed for HE rates at the upper
edge of the UNII-3 band (5745 MHz - 5825 MHz), in dBm, in steps of 1 dBm.
Valid range is 0 to 31, where the default of 31 places no restriction
beyond the band's transmit power ceiling.
Default value: |
|
|
Maximum transmit power allowed for HT/VHT rates at the lower
edge of the UNII-4 band (5845 MHz - 5885 MHz), in dBm, in steps of 1 dBm.
Valid range is 0 to 31, where the default of 31 places no restriction
beyond the band's transmit power ceiling.
Default value: |
|
|
Maximum transmit power allowed for HE rates at the lower
edge of the UNII-4 band (5845 MHz - 5885 MHz), in dBm, in steps of 1 dBm.
Valid range is 0 to 31, where the default of 31 places no restriction
beyond the band's transmit power ceiling.
Default value: |
|
|
Maximum transmit power allowed for HT/VHT rates at the upper
edge of the UNII-4 band (5845 MHz - 5885 MHz), in dBm, in steps of 1 dBm.
Valid range is 0 to 31, where the default of 31 places no restriction
beyond the band's transmit power ceiling.
Default value: |
|
|
Maximum transmit power allowed for HE rates at the upper
edge of the UNII-4 band (5845 MHz - 5885 MHz), in dBm, in steps of 1 dBm.
Valid range is 0 to 31, where the default of 31 places no restriction
beyond the band's transmit power ceiling.
Default value: |
|
|
Maximum transmit power allowed for HT/VHT rates at the lower edge of the
UNII-5 band (5935 MHz - 6415 MHz), in dBm, in steps of 1 dBm. Valid range is 0 to
31, where the default of 31 places no restriction beyond the transmit
power ceiling of the band.
Default value: |
|
|
Maximum transmit power allowed for HE rates at the lower edge of the
UNII-5 band (5935 MHz - 6415 MHz), in dBm, in steps of 1 dBm. Valid range is 0 to
31, where the default of 31 places no restriction beyond the transmit
power ceiling of the band.
Default value: |
|
|
Maximum transmit power allowed for HT/VHT rates at the upper edge of the
UNII-5 band (5935 MHz - 6415 MHz), in dBm, in steps of 1 dBm. Valid range is 0 to
31, where the default of 31 places no restriction beyond the transmit
power ceiling of the band.
Default value: |
|
|
Maximum transmit power allowed for HE rates at the upper edge of the
UNII-5 band (5935 MHz - 6415 MHz), in dBm, in steps of 1 dBm. Valid range is 0 to
31, where the default of 31 places no restriction beyond the transmit
power ceiling of the band.
Default value: |
|
|
Maximum transmit power allowed for HT/VHT rates at the lower edge of the
UNII-6 band (6435 MHz - 6735 MHz), in dBm, in steps of 1 dBm. Valid range is 0 to
31, where the default of 31 places no restriction beyond the transmit
power ceiling of the band.
Default value: |
|
|
Maximum transmit power allowed for HE rates at the lower edge of the
UNII-6 band (6435 MHz - 6735 MHz), in dBm, in steps of 1 dBm. Valid range is 0 to
31, where the default of 31 places no restriction beyond the transmit
power ceiling of the band.
Default value: |
|
|
Maximum transmit power allowed for HT/VHT rates at the upper edge of the
UNII-6 band (6435 MHz - 6735 MHz), in dBm, in steps of 1 dBm. Valid range is 0 to
31, where the default of 31 places no restriction beyond the transmit
power ceiling of the band.
Default value: |
|
|
Maximum transmit power allowed for HE rates at the upper edge of the
UNII-6 band (6435 MHz - 6735 MHz), in dBm, in steps of 1 dBm. Valid range is 0 to
31, where the default of 31 places no restriction beyond the transmit
power ceiling of the band.
Default value: |
Deprecated properties not inherited from the base binding file.
(None)
Properties inherited from the base binding file, which defines common properties that may be set on many nodes. Not all of these may apply to the “nordic,nrf7120-wifi” compatible.
(None)