xlnx,ps-gpio

Vendor: Xilinx

Note

An implementation of a driver matching this compatible is available in drivers/gpio/gpio_xlnx_ps.c.

Description

Xilinx Zynq-7000/ZynqMP MIO/EMIO GPIO controller node.

This GPIO controller is contained in both the Xilinx Zynq-7000 and
ZynqMP (UltraScale) SoCs. It interfaces both I/O pins of the SoC,
which can be mapped in the system design tools (MIO pins), or SoC-
internal signals between the processor system and the programmable
logic part of the SoC (EMIO pins).

It is organized in banks, where the number of banks and total number
of available GPIO pins differs between the two SoC families:

Zynq-7000 (comp. Zynq-7000 TRM, chap. 14.1.2, p. 381):
  * Bank 0: MIO  pins [31:00]
  * Bank 1: MIO  pins [53:32] (total: 54 MIO pins)
  * Bank 2: EMIO pins [31:00]
  * Bank 3: EMIO pins [63:32] (total: 64 EMIO pins)

ZynqMP (UltraScale) (comp. Ultrascale TRM, chap. 27, p. 769):
  * Bank 0: MIO  pins [25:00]
  * Bank 1: MIO  pins [51:26]
  * Bank 2: MIO  pins [77:52] (total: 78 MIO pins, 26 per bank)
  * Bank 3: EMIO pins [31:00]
  * Bank 4: EMIO pins [63:32]
  * Bank 5: EMIO pins [95:64] (total: 96 EMIO pins)

The controller is interrupt-capable. Certain pins both in the Zynq-
7000 and the ZynqMP are reserved or at least limited regarding their
direction.

Properties

Properties not inherited from the base binding file.

(None)