panasonic,reduced-arduino-header
Vendor: Panasonic Corporation
Description
Panasonic's reduced Arduino header.
D15 21
D14 20
AREF -
GND -
- N/C D13 19
- IOREF D12 18
- RESET D11 17
- 3V3 D10 16
- 5V D9 NC
- GND D8 NC
- GND
- VIN D7 NC
D6 NC
0 A0 D5 11
1 A1 D4 10
2 A2 D3 9
3 A3 D2 8
NC A4 D1 7
NC A5 D0 6
Panasonic's reduced Arduino header is based on the Arduino UNO layout
and provides four different headers. The main difference is that some
pins are not available due to the lack of pins on the Panasonic module.
These unconnected pins are labeled "NC" in the mapping above.
So:
1. Power Supply header exactly, like on Arduino UNO layout.
2. Analog Input header, like on Arduino UNO layout, but A4 and A5 are
not connected.
3. 8-pin header (opposite Analog Input). Digital input signals, like on
Arduino UNO layout, labeled from D0 at the bottom to D7 at the top, but D6
and D7 are not connected.
4. 10-pin header (opposite Power Supply). Digital input signals, like on
Arduino UNO layout, labeled from D8 at the bottom through D15 at the top,
but D8 and D9 are not connected.
Properties
Properties not inherited from the base binding file.
Name |
Type |
Details |
---|---|---|
|
|
This property is required. |
|
|
|
|
|
|
|
|
Number of items to expect in a GPIO specifier
This property is required. |
Deprecated properties not inherited from the base binding file.
(None)
Properties inherited from the base binding file, which defines common properties that may be set on many nodes. Not all of these may apply to the “panasonic,reduced-arduino-header” compatible.
Name |
Type |
Details |
---|---|---|
|
|
indicates the operational status of a device
Legal values: See Important properties for more information. |
|
|
compatible strings
This property is required. See Important properties for more information. |
|
|
register space
See Important properties for more information. |
|
|
name of each register space
|
|
|
interrupts for device
See Important properties for more information. |
|
|
extended interrupt specifier for device
|
|
|
name of each interrupt
|
|
|
phandle to interrupt controller node
|
|
|
Human readable string describing the device (used as device_get_binding() argument)
See Important properties for more information. This property is deprecated. |
|
|
Clock gate information
|
|
|
name of each clock
|
|
|
number of address cells in reg property
|
|
|
number of size cells in reg property
|
|
|
DMA channels specifiers
|
|
|
Provided names of DMA channel specifiers
|
|
|
IO channels specifiers
|
|
|
Provided names of IO channel specifiers
|
|
|
mailbox / IPM channels specifiers
|
|
|
Provided names of mailbox / IPM channel specifiers
|
|
|
Power domain specifiers
|
|
|
Provided names of power domain specifiers
|
|
|
Number of cells in power-domains property
|
|
|
Do not initialize device automatically on boot. Device should be manually
initialized using device_init().
|
|
|
Property to identify that a device can be used as wake up source.
When this property is provided a specific flag is set into the
device that tells the system that the device is capable of
wake up the system.
Wake up capable devices are disabled (interruptions will not wake up
the system) by default but they can be enabled at runtime if necessary.
|
|
|
Automatically configure the device for runtime power management after the
init function runs.
|
|
|
List of power states that will disable this device power.
|