st,stm32h7rs-rcc

Vendor: STMicroelectronics

Description

STM32 Reset and Clock controller node for STM32H7RS devices
This node is in charge of system clock ('SYSCLK') source selection and
System Clock Generation.

Configuring STM32 Reset and Clock controller node:

System clock source should be selected amongst the clock nodes available in "clocks"
node (typically 'clk_hse, clk_csi', 'pll', ...).
As part of this node configuration, SYSCLK frequency should also be defined, using
"clock-frequency" property.
Last, bus clocks (typically HCLK, PCLK1, PCLK2) should be configured using matching
prescaler properties.
Here is an example of correctly configured rcc node:
&rcc {
         clocks = <&pll>;  /* Set pll as SYSCLK source */
         clock-frequency = <DT_FREQ_M(280)>; /* SYSCLK runs at 280MHz */
         dcpre = <1>;
         hpre = <1>;
         ppre1 = <1>;
         ppre2 = <1>;
         ppre4 = <1>;
         ppre5 = <1>;
}

Confere st,stm32-rcc binding for information about domain clocks configuration.

Properties

Properties not inherited from the base binding file.

Name

Type

Details

#clock-cells

int

Number of items to expect in a Clock specifier

This property is required.

Constant value: 2

clock-frequency

int

default frequency in Hz for clock output

This property is required.

dcpre

int

CPU clock prescaler. Sets a HCLK frequency (feeding Cortex-M Systick)
lower than SYSCLK frequency (actual core frequency).
Zephyr doesn't make a difference today between these two clocks.
Changing this prescaler is not allowed until it is made possible to
use them independently in Zephyr clock subsystem.

This property is required.

Legal values: 1, 2, 4, 8, 16, 64, 128, 256, 512

hpre

int

peripheral clock to the Bus Matrix APB (1/2/4/5) and AHB(1/2/3/4/5) peripheral
divider of the CPU clock by this  prescaler (BMPRE register)

This property is required.

Legal values: 1, 2, 4, 8, 16, 64, 128, 256, 512

ppre1

int

APB1 peripheral prescaler

This property is required.

Legal values: 1, 2, 4, 8, 16

ppre2

int

APB2 peripheral prescaler

This property is required.

Legal values: 1, 2, 4, 8, 16

ppre4

int

APB4 peripheral prescaler

This property is required.

Legal values: 1, 2, 4, 8, 16

ppre5

int

APB5 peripheral prescaler

This property is required.

Legal values: 1, 2, 4, 8, 16

Specifier cell names

  • clock cells: bus, bits