PAC194X

Microchip PAC194x power monitor. More...

Files
file	pac194x.h
	Header file for extended sensor API of PAC194x/PAC195x sensor.
file	pac194x.h
	Devicetree binding constants for the Microchip PAC194x power monitor.

Enumerations
enum	pac194x_sensor_attribute { SENSOR_ATTR_SAMPLING_FREQUENCY_RAW = SENSOR_ATTR_PRIV_START , SENSOR_ATTR_CHANNEL_ENABLED , SENSOR_ATTR_REFRESH_MODE , SENSOR_ATTR_FORCE_REFRESH_CMD }
	Additional attributes supported by the PAC194x/PAC195x. More...
enum	pac194x_sensor_attr_refresh_mode { PAC194X_SENSOR_ATTR_REFRESH_MODE_AUTO_NOWAIT = 0 , PAC194X_SENSOR_ATTR_REFRESH_MODE_AUTO_WAIT , PAC194X_SENSOR_ATTR_REFRESH_MODE_MANUAL }
	Refresh modes for PAC194x/PAC195x. More...
enum	pac194x_sensor_attr_force_refresh_cmd { PAC194X_SENSOR_ATTR_FORCE_REFRESH_CMD_SINGLE = 0 , PAC194X_SENSOR_ATTR_FORCE_REFRESH_CMD_ALL }
	Refresh commands for PAC194x/PAC195x. More...
enum	pac194x_sensor_channel {   PAC194X_CHAN_VBUS1 = SENSOR_CHAN_PRIV_START , PAC194X_CHAN_VBUS2 , PAC194X_CHAN_VBUS3 , PAC194X_CHAN_VBUS4 ,   PAC194X_CHAN_CURR1 , PAC194X_CHAN_CURR2 , PAC194X_CHAN_CURR3 , PAC194X_CHAN_CURR4 ,   PAC194X_CHAN_ACC1 , PAC194X_CHAN_ACC2 , PAC194X_CHAN_ACC3 , PAC194X_CHAN_ACC4 ,   PAC194X_CHAN_ACC1_AVG , PAC194X_CHAN_ACC2_AVG , PAC194X_CHAN_ACC3_AVG , PAC194X_CHAN_ACC4_AVG ,   PAC194X_CHAN_ACC_COUNT }
	Additional channels supported by the PAC194x/PAC195x. More...

Full-scale range mode
Values for the microchip,vbus-mode and microchip,vsense-mode devicetree properties.
#define	PAC_UNIPOLAR_FSR   0
	Unipolar full-scale range.
#define	PAC_BIPOLAR_FSR   1
	Bipolar full-scale range.
#define	PAC_BIPOLAR_HALF_FSR   2
	Bipolar half (FSR / 2) range.

Accumulation source
Values for the microchip,accumulation-mode devicetree property.
#define	PAC_ACCUM_VPOWER   0
	Accumulate power data.
#define	PAC_ACCUM_VSENSE   1
	Accumulate current (sense voltage) data.
#define	PAC_ACCUM_VBUS   2
	Accumulate bus voltage data.

Refresh mode
Values for the microchip,refresh-mode devicetree property.
#define	PAC_REFRESH_MANUAL   0
	Manual refresh.
#define	PAC_REFRESH_AUTO_WAIT   1
	Automatic refresh, wait for valid data.
#define	PAC_REFRESH_AUTO_NOWAIT   2
	Automatic refresh, do not wait.

Detailed Description

Microchip PAC194x power monitor.

Macro Definition Documentation

PAC_ACCUM_VBUS

#define PAC_ACCUM_VBUS   2

#include <zephyr/dt-bindings/sensor/pac194x.h>

Accumulate bus voltage data.

PAC_ACCUM_VPOWER

#define PAC_ACCUM_VPOWER   0

#include <zephyr/dt-bindings/sensor/pac194x.h>

Accumulate power data.

PAC_ACCUM_VSENSE

#define PAC_ACCUM_VSENSE   1

#include <zephyr/dt-bindings/sensor/pac194x.h>

Accumulate current (sense voltage) data.

PAC_BIPOLAR_FSR

#define PAC_BIPOLAR_FSR   1

#include <zephyr/dt-bindings/sensor/pac194x.h>

Bipolar full-scale range.

PAC_BIPOLAR_HALF_FSR

#define PAC_BIPOLAR_HALF_FSR   2

#include <zephyr/dt-bindings/sensor/pac194x.h>

Bipolar half (FSR / 2) range.

PAC_REFRESH_AUTO_NOWAIT

#define PAC_REFRESH_AUTO_NOWAIT   2

#include <zephyr/dt-bindings/sensor/pac194x.h>

Automatic refresh, do not wait.

PAC_REFRESH_AUTO_WAIT

#define PAC_REFRESH_AUTO_WAIT   1

#include <zephyr/dt-bindings/sensor/pac194x.h>

Automatic refresh, wait for valid data.

PAC_REFRESH_MANUAL

#define PAC_REFRESH_MANUAL   0

#include <zephyr/dt-bindings/sensor/pac194x.h>

Manual refresh.

PAC_UNIPOLAR_FSR

#define PAC_UNIPOLAR_FSR   0

#include <zephyr/dt-bindings/sensor/pac194x.h>

Unipolar full-scale range.

Enumeration Type Documentation

pac194x_sensor_attr_force_refresh_cmd

enum pac194x_sensor_attr_force_refresh_cmd

#include <zephyr/drivers/sensor/pac194x.h>

Refresh commands for PAC194x/PAC195x.

Enumerator
PAC194X_SENSOR_ATTR_FORCE_REFRESH_CMD_SINGLE	Refresh only a single PAC device.
PAC194X_SENSOR_ATTR_FORCE_REFRESH_CMD_ALL	Refresh all PACs on the I2C bus at once.

pac194x_sensor_attr_refresh_mode

enum pac194x_sensor_attr_refresh_mode

#include <zephyr/drivers/sensor/pac194x.h>

Refresh modes for PAC194x/PAC195x.

Enumerator
PAC194X_SENSOR_ATTR_REFRESH_MODE_AUTO_NOWAIT	sample_fetch is non-blocking. Refresh is being called after samples are collected from ACC registers.
PAC194X_SENSOR_ATTR_REFRESH_MODE_AUTO_WAIT	sample_fetch is blocking. Refresh is being called before samples are collected from ACC registers and function waits at least 1ms for data to be accessible.
PAC194X_SENSOR_ATTR_REFRESH_MODE_MANUAL	sample_fetch is non-blocking and refresh is not being called automatically. The user is responsible for sending an appropriate REFRESH command.

pac194x_sensor_attribute

enum pac194x_sensor_attribute

#include <zephyr/drivers/sensor/pac194x.h>

Additional attributes supported by the PAC194x/PAC195x.

Enumerator
SENSOR_ATTR_SAMPLING_FREQUENCY_RAW	Sampling frequency in RAW format.
SENSOR_ATTR_CHANNEL_ENABLED	Enable/disable specific channel.
SENSOR_ATTR_REFRESH_MODE	PAC refresh mode.
SENSOR_ATTR_FORCE_REFRESH_CMD	Command: force refresh PAC accumulated data.

pac194x_sensor_channel

enum pac194x_sensor_channel

#include <zephyr/drivers/sensor/pac194x.h>

Additional channels supported by the PAC194x/PAC195x.

Enumerator
PAC194X_CHAN_VBUS1	Channel 1: voltage sensor.
PAC194X_CHAN_VBUS2	Channel 2: voltage sensor.
PAC194X_CHAN_VBUS3	Channel 3: voltage sensor.
PAC194X_CHAN_VBUS4	Channel 4: voltage sensor.
PAC194X_CHAN_CURR1	Channel 1: current sensor.
PAC194X_CHAN_CURR2	Channel 2: current sensor.
PAC194X_CHAN_CURR3	Channel 3: current sensor.
PAC194X_CHAN_CURR4	Channel 4: current sensor.
PAC194X_CHAN_ACC1	Channel 1: accumulator RAW value.
PAC194X_CHAN_ACC2	Channel 2: accumulator RAW value.
PAC194X_CHAN_ACC3	Channel 3: accumulator RAW value.
PAC194X_CHAN_ACC4	Channel 4: accumulator RAW value.
PAC194X_CHAN_ACC1_AVG	Channel 1: accumulator AVG value over SAMPLE_COUNT.
PAC194X_CHAN_ACC2_AVG	Channel 2: accumulator AVG value over SAMPLE_COUNT.
PAC194X_CHAN_ACC3_AVG	Channel 3: accumulator AVG value over SAMPLE_COUNT.
PAC194X_CHAN_ACC4_AVG	Channel 4: accumulator AVG value over SAMPLE_COUNT.
PAC194X_CHAN_ACC_COUNT	Accumulator SAMPLE_COUNT since last REFRESH.