Subnet Configuration

Subnet Configuration . More...

Functions
uint8_t	bt_mesh_subnet_add (uint16_t net_idx, const uint8_t key[16])
	Add a Subnet.
uint8_t	bt_mesh_subnet_update (uint16_t net_idx, const uint8_t key[16])
	Update the given Subnet.
uint8_t	bt_mesh_subnet_del (uint16_t net_idx)
	Delete a Subnet.
bool	bt_mesh_subnet_exists (uint16_t net_idx)
	Check whether a Subnet is known.
uint8_t	bt_mesh_subnet_kr_phase_set (uint16_t net_idx, uint8_t *phase)
	Set the Subnet's Key Refresh phase.
uint8_t	bt_mesh_subnet_kr_phase_get (uint16_t net_idx, uint8_t *phase)
	Get the Subnet's Key Refresh phase.
uint8_t	bt_mesh_subnet_node_id_set (uint16_t net_idx, enum bt_mesh_feat_state node_id)
	Set the Node Identity state of the Subnet.
uint8_t	bt_mesh_subnet_node_id_get (uint16_t net_idx, enum bt_mesh_feat_state *node_id)
	Get the Node Identity state of the Subnet.
uint8_t	bt_mesh_subnet_priv_node_id_set (uint16_t net_idx, enum bt_mesh_feat_state priv_node_id)
	Set the Private Node Identity state of the Subnet.
uint8_t	bt_mesh_subnet_priv_node_id_get (uint16_t net_idx, enum bt_mesh_feat_state *priv_node_id)
	Get the Private Node Identity state of the Subnet.
ssize_t	bt_mesh_subnets_get (uint16_t net_idxs[], size_t max, off_t skip)
	Get a list of all known Subnet indexes.

Detailed Description

Subnet Configuration .

Function Documentation

bt_mesh_subnet_add()

uint8_t bt_mesh_subnet_add	(	uint16_t	net_idx,
		const uint8_t	key[16] )

#include <zephyr/bluetooth/mesh/cfg.h>

Add a Subnet.

Adds a subnet with the given network index and network key to the list of known Subnets. All messages sent on the given Subnet will be processed by this node, and the node may send and receive Network Beacons on the given Subnet.

Parameters

net_idx	Network index.
key	Root network key of the Subnet. All other keys are derived from this.

Return values

STATUS_SUCCESS	The Subnet was successfully added.
STATUS_INSUFF_RESOURCES	No room for this Subnet.
STATUS_UNSPECIFIED	The Subnet couldn't be created for some reason.

bt_mesh_subnet_del()

uint8_t bt_mesh_subnet_del

(

uint16_t

net_idx

)

#include <zephyr/bluetooth/mesh/cfg.h>

Delete a Subnet.

Removes the Subnet with the given network index from the node. The node will stop sending Network Beacons with the given Subnet, and can no longer process messages on this Subnet.

All Applications bound to this Subnet are also deleted.

Parameters

net_idx

Network index.

Return values

STATUS_SUCCESS	The Subnet was deleted.
STATUS_INVALID_NETKEY	The NetIdx is unknown.

bt_mesh_subnet_exists()

bool bt_mesh_subnet_exists

(

uint16_t

net_idx

)

#include <zephyr/bluetooth/mesh/cfg.h>

Check whether a Subnet is known.

Parameters

net_idx

Network index

Returns

true if a Subnet with the given index exists, false otherwise.

bt_mesh_subnet_kr_phase_get()

uint8_t bt_mesh_subnet_kr_phase_get	(	uint16_t	net_idx,
		uint8_t *	phase )

#include <zephyr/bluetooth/mesh/cfg.h>

Get the Subnet's Key Refresh phase.

Parameters

net_idx	Network index.
phase	Pointer to the Key Refresh variable to fill.

Return values

STATUS_SUCCESS	Successfully populated the phase variable.
STATUS_INVALID_NETKEY	The NetIdx is unknown.

bt_mesh_subnet_kr_phase_set()

uint8_t bt_mesh_subnet_kr_phase_set	(	uint16_t	net_idx,
		uint8_t *	phase )

#include <zephyr/bluetooth/mesh/cfg.h>

Set the Subnet's Key Refresh phase.

The Key Refresh procedure is started by updating the Subnet keys through bt_mesh_subnet_update. This puts the Subnet in Key Refresh Phase 1. Once all nodes have received the new Subnet key, Key Refresh Phase 2 can be activated through this function to start transmitting with the new network key. Finally, to revoke the old key, set the Key Refresh Phase to 3. This removes the old keys from the node, and returns the Subnet back to normal single-key operation with the new key set.

Parameters

net_idx	Network index.
phase	Pointer to the new Key Refresh phase. Will return the actual Key Refresh phase after updating.

Return values

STATUS_SUCCESS	The Key Refresh phase of the Subnet was successfully changed.
STATUS_INVALID_NETKEY	The NetIdx is unknown.
STATUS_CANNOT_UPDATE	The given phase change is invalid.

bt_mesh_subnet_node_id_get()

uint8_t bt_mesh_subnet_node_id_get	(	uint16_t	net_idx,
		enum bt_mesh_feat_state *	node_id )

#include <zephyr/bluetooth/mesh/cfg.h>

Get the Node Identity state of the Subnet.

Parameters

net_idx	Network index.
node_id	Node Identity variable to fill.

Return values

STATUS_SUCCESS	Successfully populated the node_id variable.
STATUS_INVALID_NETKEY	The NetIdx is unknown.

bt_mesh_subnet_node_id_set()

uint8_t bt_mesh_subnet_node_id_set	(	uint16_t	net_idx,
		enum bt_mesh_feat_state	node_id )

#include <zephyr/bluetooth/mesh/cfg.h>

Set the Node Identity state of the Subnet.

The Node Identity state of a Subnet determines whether the Subnet advertises connectable Node Identity beacons for Proxy Clients to connect to. Once started, the Node Identity beacon runs for 60 seconds, or until it is stopped.

This function serves the same purpose as bt_mesh_proxy_identity_enable, but only acts on a single Subnet.

GATT Proxy support must be enabled through CONFIG_BT_MESH_GATT_PROXY.

Parameters

net_idx	Network index.
node_id	New Node Identity state, must be either BT_MESH_FEATURE_ENABLED or BT_MESH_FEATURE_DISABLED.

Return values

STATUS_SUCCESS	Successfully set the Node Identity state of the Subnet.
STATUS_INVALID_NETKEY	The NetIdx is unknown.
STATUS_FEAT_NOT_SUPP	The Node Identity feature is not supported.
STATUS_CANNOT_SET	Couldn't set the Node Identity state.

bt_mesh_subnet_priv_node_id_get()

uint8_t bt_mesh_subnet_priv_node_id_get	(	uint16_t	net_idx,
		enum bt_mesh_feat_state *	priv_node_id )

#include <zephyr/bluetooth/mesh/cfg.h>

Get the Private Node Identity state of the Subnet.

Parameters

net_idx	Network index.
priv_node_id	Private Node Identity variable to fill.

Return values

STATUS_SUCCESS	Successfully populated the priv_node_id variable.
STATUS_INVALID_NETKEY	The NetIdx is unknown.

bt_mesh_subnet_priv_node_id_set()

uint8_t bt_mesh_subnet_priv_node_id_set	(	uint16_t	net_idx,
		enum bt_mesh_feat_state	priv_node_id )

#include <zephyr/bluetooth/mesh/cfg.h>

Set the Private Node Identity state of the Subnet.

The Private Node Identity state of a Subnet determines whether the Subnet advertises connectable Private Node Identity beacons for Proxy Clients to connect to. Once started, the Node Identity beacon runs for 60 seconds, or until it is stopped.

Private Node Identity can only be enabled if regular Node Identity is not enabled for any subnet.

GATT Proxy and Private Beacon support must be enabled through CONFIG_BT_MESH_GATT_PROXY and CONFIG_BT_MESH_PRIV_BEACONS.

Parameters

net_idx	Network index.
priv_node_id	New Private Node Identity state, must be either BT_MESH_FEATURE_ENABLED or BT_MESH_FEATURE_DISABLED.

Return values

STATUS_SUCCESS	Successfully set the Private Node Identity state of the Subnet.
STATUS_INVALID_NETKEY	The NetIdx is unknown.
STATUS_FEAT_NOT_SUPP	The Private Node Identity feature is not supported.
STATUS_TEMP_STATE_CHG_FAIL	The Private Node Identity state cannot be enabled, because Node Identity state is already enabled.
STATUS_CANNOT_SET	Couldn't set the Private Node Identity state.

bt_mesh_subnet_update()

uint8_t bt_mesh_subnet_update	(	uint16_t	net_idx,
		const uint8_t	key[16] )

#include <zephyr/bluetooth/mesh/cfg.h>

Update the given Subnet.

Starts the Key Refresh procedure for this Subnet by adding a second set of encryption keys. The Subnet will continue sending with the old key (but receiving messages using both) until the Subnet enters Key Refresh phase 2.

This allows a network configurator to replace old network and application keys for the entire network, effectively removing access for all nodes that aren't given the new keys.

Parameters

net_idx	Network index.
key	New root network key of the Subnet.

Return values

STATUS_SUCCESS	The Subnet was updated with a second key.
STATUS_INVALID_NETKEY	The NetIdx is unknown.
STATUS_IDX_ALREADY_STORED	The key value is the same as the current key.
STATUS_CANNOT_UPDATE	The Subnet cannot be updated for some reason.

bt_mesh_subnets_get()

ssize_t bt_mesh_subnets_get	(	uint16_t	net_idxs[],
		size_t	max,
		off_t	skip )

#include <zephyr/bluetooth/mesh/cfg.h>

Get a list of all known Subnet indexes.

Builds a list of all known Subnet indexes in the net_idxs array. If the net_idxs array is smaller than the list of known Subnets, this function fills all available entries and returns -ENOMEM. In this case, the next max entries of the list can be read out by calling

bt_mesh_subnets_get(list, max, max);

Note that any changes to the Subnet list between calls to this function could change the order and number of entries in the list.

Parameters

net_idxs	Array to fill.
max	Max number of indexes to return.
skip	Number of indexes to skip. Enables batched processing of the list.

Returns

The number of indexes added to the net_idxs array, or -ENOMEM if the number of known Subnets exceeds the max parameter.